A rare and remarkable collection of residences on a pristine coastline
Bianca by Mosaic
1 SURF STREET
BILINGA QLD 4225
Date: December 2022
Project: Bianca by Mosaic
Builder: Mosaic Construction
Applicator: S&K Waterproofing
Application: Waterproofing, Tiling Systems
Beachside Living Done in Style
Bianca by Mosaic stands as a remarkably rare and intimate collection of residences set against the backdrop of a pristine coastline.
This exclusive address comprises only 13 three-bedroom residences spread across seven levels, and generous amenities, including a resort pool, and relaxation area with barbeque and seating.
In collaboration with SJB Architecture, Bianca is an elegantly modern design characterised by thoughtful material selection, and a scale that harmonises with the surroundings, creating a distinctive yet timeless sense of place.
S&K Waterproofing was enlisted to complete the waterproofing works for all levels.
Products Specified
WASTE BIN STORE, REFUSE AND FIRE PUMP ROOMS
Primer: Hychem E100, a solvent-based two-component epoxy primer.
Epoxy Base Coat: Hychem SupaFloor, a high build, multi-purpose pigmented epoxy coating.
Non-Slip Aggregate: Appropriate nonslip aggregate.
Epoxy Wear Coat: Hychem SupaFloor, a high build, multi-purpose pigmented epoxy coating.
HYDRANT & FIRE BOOSTER CUPBOARDS
Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1 (if required).
Primer: WPA 360, a one-part, water-based primer.
Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.
Membrane: WPA 200, a highly flexible, two-part, rapid-drying, cementitious waterproofing membrane. (Minimum of 2 coats to achieve a DFT of 1000 microns).
WINDOW & DOOR REVEALS
Primer: WPA 460, a two-part water-based epoxy primer.
Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.
Membrane: WPA 230UV, one part fibre reinforced water based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
INTERNAL WET AREAS (TILED)
Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1 (if required).
Primer: WPA 360, a one-part, water-based primer.
Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.
Fillets / Bond Breaker: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.
Membrane: WPA 500, a one-part fibre-reinforced waterborne under-tile membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Tile Adhesive: TPA Lite, a premium grade C2S2, white, fibre-reinforced, flexible cement-based tile adhesive.
Tile Grout: TPA Tru Colour Grout, is a high-performance stain & efflorescence resistant grout.
Movement Joints: TPA Tru Colour Sanitary Silicone, is a mould-resistant, non-diluted, high-performance, UV-resistant, neutral cure silicone sealant. drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
TERRACES & BALCONIES (PEDESTALS)
Primer: WPA 460, two-part water-based epoxy primer.
Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.
Transitions: WPA Elastoband, is an innovative detailing system designed for waterproofing and sealing all types of points, junctions, and general areas subject to movement.
Membrane: WPA 200, a highly flexible, two-part, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Pedestal System: Keksia NM Pedestal System, a modular and adjustable pedestal support system for raised indoor and outdoor floors.
Planter Boxes Primer: WPA 460, two-part water-based epoxy primer.
Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.
Membrane above Soil Level: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane. (Minimum of 2 coats to achieve a DFT of 1000 microns).
Non-Porous Surfaces: WPA SB, is a clear fast-drying solvent-based primer.
Transitions: WPA FC, is a high-performance, fast cure, one-component polyurethane sealant.
Membrane: WPA 992, a one-part liquid applied moisture-cured polyurethane membrane system, with the addition of WPA 992 Root Inhibitor Additive, root inhibitor membrane additive (minimum 2 coats to achieve a DFT of no less than 1200 microns).
Membrane Protection: WPA Drainage Cell, a drainage cell and root-resistant protection board.
POOL STRUCTURE
Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1 (if required).
Primer: WPA 560, two-part water-based epoxy designed as a water and vapour-proof coating.
Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.
Membrane: WPA 200, a highly flexible, two-part, rapid-drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
WATER TANK & RETENTION TANK
Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.
Membrane: WPA 100, a single component, fibre-reinforced, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 2000 microns).
SWIMMING POOL
Slurry Bond Coat: Laticrete 335, a high-performance thin-bed adhesive for installing a wide range of tiles and stone.
Render/ Mortar Beds: Laticrete 3701 Fortified Mortar Bed, a polymer-fortified blend of carefully selected polymers, Portland cement and graded aggregates
Moisture Shield: LATAPOXY Moisture Shield, a 2 component, epoxy coating specifically designed to reduce moisture vapour emissions.
Membrane: Laticrete Hydro Ban, a thin, load-bearing waterproofing/crack isolation membrane.
Tile Adhesive: Laticrete 335, a high-performance thin-bed adhesive for installing a wide range of tiles and stones including low absorption ceramic and porcelain tiles, natural and manufactured stone.
Tile Grout: Laticrete Permacolor Grout, a high-performance, fast-setting grout
Sealant: Laticrete Latasil Sealant, a high-performance, one-component, neutral cure, 100% silicone sealant designed for ceramic tile and stone applications (primed with Laticrete 9118 primer).
POOL DECK (TIMBER)
Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1 (if required).
Primer: WPA 460, a two-part, water-based epoxy primer.
Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes,
Fillets / Bond Breaker: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.
Membrane: WPA 200, a highly flexible, two-part, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Pedestal System: Keksia NM Pedestal System, a modular and adjustable pedestal support system for raised indoor and outdoor floors (if required).
EXPOSED CONCRETE ROOF, LIFT OVERRUN & ROOF PLANT AREAS
Primer: WPA 460, a two-part, water-based epoxy primer.
Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes,
Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.
Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Topcoat (Trafficable Areas): WPA TuffCote, a hard-wearing, slip-resistant topcoat for external floor surfaces.
OSD TANK ROOF (BALLAST ROCK) & CONCRETE SUN HOODS
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.
Primer: WPA 460, a two-part, water-based epoxy primer.
Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes,
Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.
Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Products used
- Hychem E100
- Hychem SupaFloor
- WPA 100
- WPA 160
- WPA 200
- WPA 230UV
- WPA 360
- WPA 460
- WPA 500
- WPA 560
- WPA 992
- WPA 992 Root Inhibitor Additive
- WPA TuffCote
- WPA Drainage Cell
- WPA Elastoband
- WPA SPUR
- WPA SB
- WPA FC
- TPA Lite
- TPA Tru Colour Sanitary Silicone
- Laticrete 335
- Laticrete 3701 Fortified Mortar Bed
- LATAPOXY Moisture Shield
- Laticrete Hydro Ban
203-170
Hychem E100 Epoxy Primer
203-146
Hychem SupaFloor
490-002
WPA 360
301-310
WPA Elastoband
420-200
WPA 200
490-005
WPA 460
800-106
WPA SPUR
425-023
WPA 230UV
490-007
WPA 160
419-154
WPA 500
105-755
TPA Lite
701-490
TPA TRU Colour Sanitary Silicone
490-006
WPA SB Primer
700-160
WPA FC Fast Cure
416-101
WPA 992
416-103
WPA 992 Root Inhibiter
350-500
WPA Drainage Cell
490-134
WPA 560
420-310
WPA 100
105-720
Laticrete 335 Premium Adhesive
101-350
LATICRETE® 3701 Fortified Mortar Bed
412-201
LATICRETE® LATAPOXY® Moisture Shield
412-200
LATICRETE® HYDRO BAN®
425-502