One Cannes (Tower)

Products Specified

Bin Store and Waste Room

Prepatory: Appropriate concrete preparation to achieve a CSP2 to the substrate being coated.

Primer: Hychem E100, a solvent-based two-component epoxy primer.

Epoxy Base 

Coat: Hychem SupaFloor, a high build, multi-purpose pigmented epoxy coating. 

Non-Slip Aggregate: Broadcast to refusal with an appropriate nonslip aggregate. 

Epoxy Wear Coat: Hychem SupaFloor, a high build, multi-purpose pigmented epoxy coating.

Carpark & Driveway – Concrete Sealer

1st Coat: Solutions Densify-K, a concrete densifier for sealing and protection of concrete surfaces, diluted with 2-part water depending on concrete porosity.

2nd Coat: Solutions Densify-K, a concrete densifier for sealing and protection of concrete surfaces, applied neatly.

3rd Coat: Solutions Densify-K, a concrete densifier for sealing and protection of concrete surfaces, applied at a mix rate of 50/50 with water.

Outdoor Walkways & Terrace Areas – Crazy Pave

Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and tile beds, suitable for internal and external applications (if required).

Balcony Edge Trim: Tile Edge Balcony Trim, is a durable extruded anodised or powder-coated aluminium profile (if required).

Primer: WPA 460, a two-part, water-based epoxy primer.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Hydrant Booster, Water Meter & Padmount Enclosure 

Primer: WPA 360, a one-part, water-based primer.

Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.

Membrane: WPA 200, a highly flexible, two-part, rapid-drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Services Cupboards Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and tile beds, suitable for internal and external applications (if required).

Primer: WPA 360, a one-part, water-based primer.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA 230UV, one part fibre reinforced water based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Sprinkler Pump Room

Primer: WPA 460, a two-part, water-based epoxy primer.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.

Membrane: WPA 200, a highly flexible, two-part, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Topcoat (Optional): WPA TuffCote, is a hard-wearing, waterproofing membrane and slip-resistant membrane for external floor surfaces (if required for medium – heavy foot traffic).

Mechanical Plenum Area

Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and tile beds, suitable for internal and external applications (if required).

Primer: WPA 360, a one-part, water-based primer.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA Rapid, a waterborne, flexible waterproofing membrane, utilising next-generation, self-crosslinking technology (minimum of 2 coats to achieve a DFT of 800 microns). 

Tile Adhesive: TPA Lite, a premium grade C2S2, white, fibre-reinforced, flexible cement-based tile adhesive.

Window & Door Reveals

Primer: WPA 360, a one-part, water-based primer.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA 230UV, one part fibre reinforced water based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Internal Wet Areas – Tiled 

Primer: WPA 360, a one-part, water-based primer.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA Rapid, a waterborne, flexible waterproofing membrane, utilising next-generation, self-crosslinking technology (minimum of 2 coats to achieve a DFT of 800 microns).

Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and tile beds, suitable for internal and external applications (if required).

Balconies – Tiled 

Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and

tile beds, suitable for internal and external applications (if required).

Balcony Edge Trim: Tile Edge Balcony Trim, is a durable extruded anodised or powder-coated aluminium profile (if required).

Primer: WPA 460, a two-part, water-based epoxy primer.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Roof Terrace – Crazy Pave 

Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and tile beds, suitable for internal and external applications (if required).

Balcony Edge Trim: Tile Edge Balcony Trim, is a durable extruded anodised or powder-coated aluminium profile (if required).

Primer: WPA 460, a two-part, water-based epoxy primer.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Planter Boxes

Primer: WPA 460, two-part water-based epoxy primer.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane above Soil Level: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Non-Porous Surfaces: WPA SB, is a clear fast-drying solvent-based primer.

Transitions: WPA FC, is a high-performance, fast-cure, one-component polyurethane sealant.

Membrane: WPA 992, a one-part liquid applied moisturecured polyurethane membrane system, with the addition of WPA 992 Root Inhibitor Additive, root inhibitor membrane additive (minimum 2 coats to achieve a DFT of no less than 1200 microns).

Membrane Protection: Coreflute Protection Board extruded polypropylene sheet.

Drainage Cell (if required): WPA Drainage Cell, a drainage cell and root-resistant protection board. 

Planter Box Capping & External Surfaces

Primer: WPA 460, two-part water-based epoxy primer.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane:  WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Pool Structure Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed. 

Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and tile beds, suitable for internal and external applications (if required).

Primer: WPA 460, a two-part, water-based epoxy primer. or WPA 560, a two-part water-based epoxy designed as a water and vapour-proof coating.

Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.

Membrane: WPA 200, a highly flexible, two-part, rapid-drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Pool Deck – Crazy Pave

Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and tile beds, suitable for internal and external applications (if required).

Primer: WPA 460, a two-part, water-based epoxy primer.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Fillets / Bond Breaker: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Tiling System: An appropriate pool chemical-resistant tiling system, done by others. 

Sauna Room Primer: WPA 560, two-part water-based epoxy designed as a water and vapour-proof coating.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.

Membrane: WPA 200, a highly flexible, two-part, rapid-drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and tile beds, suitable for internal and external applications (if required).

Tiling System: An appropriate tiling system, done by others.

Roof Terrace Artificial Turf Area

Screed: TPA Screed, is a pre-blended screed mixture for the installation of cementitious screeds and tile beds, suitable for internal and external applications (if required).

Primer: WPA 460, a two-part, water-based epoxy primer.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Transitions: WPA Elastoband, is an innovative detailing system designed for waterproofing and sealing all types of points, junctions, and general areas subject to movement.

Membrane: WPA 200, a highly flexible, two-part, rapid-drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Separation Coat: WPA 560, a two-part, water-based epoxy primer.

Artificial Turf Adhesive: RL6000 Synthetic Grass Carpet Adhesive, an all-weather solvent-based (flammable) adhesive specifically formulated for the outdoor installation of non-stretch open weave polypropylene backed synthetic grass carpet. Not recommended for urethane and E.V.A.-backed carpets.

Roof Plant Area

Primer: WPA 460, a two-part, water-based epoxy primer.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Fillets / Bond Breaker: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Topcoat (Optional): WPA TuffCote, is a hard-wearing, waterproofing membrane and slip-resistant membrane for external floor surfaces (if required for medium – heavy foot traffic).

Lift Overrun & Exposed Concrete Roofs

Primer: WPA 460, a two-part, water-based epoxy primer.

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes.

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology.

Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).

Download PDF Case Study