How we can help you

Bayset doesn’t simply provide Products, we provide Information and Service. You can trust Bayset to be there: as you need us, when you need us. Our team of experts can help you figure out what you need to know. We even offer Training. Best of all? We Deliver. When you want our products brought to your site, Bayset has you covered. Talk to a specialist about what you Need today.

Case Studies

Flooring Case Studies

Home Case Studies Flooring Case Studies Foxy’s Bakery

Saving a local bakery from being shut down.

foxy’s bakery

37 maryland street
stanthorpe qld, 3480

Date: October 2016

Project: Epoxy Flooring

Applicator: Epo Floors

Application: Flooring

Upholding the Standards of a QLD Health Inspection

Due to a QLD Health inspection, Foxy’s Bakery was given 30 days for the Epoxy Floor to be repaired or replaced as bare concrete was a health hazard.

Dan from Epo Floors provided Foxy’s with an option of using Hychem Hycrete PU-SL as it would
be robust for the movement of steel wheeled equipment, constant hammering by polyurethane wheeled trolleys, provide slip resistance and stop the degradation of the concrete floor due to yeast entering the concrete slab.

Products Specified

HYCRETE PU-SL

Hycrete PU-SL is a unique polyurethane concrete product that is applied as a topping on concrete floors where
difficult service conditions are the norm. Hycrete PU-SL is recommended for use where exposure to temperatures up to 120 °c is expected. for these conditions, a minimum of 9 mm
is recommended. Hycrete PU-SL is also the product of choice where maximum resistance to acetic acid, lactic acid and other organic acids is required. resistance to food acid (e.g. phosphoric acid) and sanitising chemicals such as peroxyacetic acid solutions is also excellent.

the system is based on a solvent-less polyurethane and a cementitious quartz filler blend. the product is usually applied as a 6 mm broadcast topping complete with a range of anti-slip finishes. this broadcast system should be sealed with Hycrete PU-tc. Hycrete PU-SL can also be applied as a single-layer, smooth seamless 4 mm self-levelling topping.

Heavy duty, durable, abrasion and impact-resistant
Chemically resistant to acids, caustics, fats and cleaning solutions
Fast installation with no odour issues
Can be applied to 7-day-old concrete
Moisture tolerant and can be applied to a slightly damp surface
Available with a chemical accelerator for fast cure time even at low temperatures
Available in a variety of non-slip textures to meet and exceed Australian standards for safety
Supplied as a pre-packaged kit for uniform consistency
Available in a range of colours