SealBoss Hot Shot Water Stop Foam 650ml Inc 240mm Thin Stat Mixer

Code: 205-251
In Stock
Limited Stock
Out of Stock

SealBoss 1500 LV Water Stop Foam 650ml Inc 240mm Thin Stat Mixer

SealBoss® 1500LV is a low viscosity hydrophobic water activated (hydro active) water cut-off grout and foam seal grout based on a MDI (methylene-diphenylisocyanate) polyurethane. This product is a two component formulation to be mixed at a 1:1 ration by volume. The resin is 100% solvent free and 100% solids.

Upon contact with water the mixed 1500 Water-Stop-Foam reacts to a semi flexible foam while expanding its volume 30 to 40 times. Since water is not a component of the foam structure, the cured material is essentially not effected by water or dryness. The reacted material does not shrink or swell.

The advanced 1:1 formulation of the product results in a very dense, closed cell structure when injected under pressure. Very low counter pressure will result in a less rigid more expanded product.

For best waterproofing results a closed cell structure is desired. 1500 Water-Stop-Foam is designed for cutting off water even at elevated hydrostatic pressures. Due to the very low viscosity of the material, 1500 Water-Stop-Foam offers superior penetration in hairline crack injection. The product is also suitable for the filling of larger spaces, cracks and honeycombing in stone or concrete structures.

  • SealBoss® Product-Pump-Packer System Solution
  • 1:1 Ratio, 2 Component Cartridge System Formula
  • Unregulated For Transport
  • Advanced Phthalate Free, MDI Formulation
  • This Product is for Professional Use

Related Products