Mapei Mapefer 1K
Corrosion-Inhibiting Mortar For Rebar Protection
One-component corrosion-inhibiting cementitious mortar for the protection of reinforcing rods. Mapefer 1K is used as a re-alkalising corrosion-inhibiting protection for reinforcing rods, in the reparation of concrete carried out with shrinkage compensating mortars from the Mapegrout range or with normal cementitious mortars modified with synthetic resin latexes.
It can be applied also in underground concrete constructions. Mapefer 1K is a one-component mortar based on polymers in water dispersion, cement binders and corrosion inhibitors, to be applied on reinforcing rods to prevent rust formation. Apply two coats of Mapefer 1K with a brush on the re-bars freed of rust.
The second coat can be applied about 2 hours after the application of the first coat but preferably within 24 hours. It is recommended to completely cover the surfaces of the rods in one homogeneous coat. The total thickness of the two coats must be at least 2 mm.
Reparation with products from the Mapegrout range must be carried out once Mapefer 1K is dry (approximately 6 hours at 20°C).
Mapefer 1K meets the minimum requirements of EN 1504-7.
Size: 5Kg